Details
-
Bug
-
Resolution: Unresolved
-
Major
-
None
-
8.2
-
None
Description
I tried to provide the solution in the link below, but after the server restarted, you lost network access. I rolled back the operations in the same way again.
# ethtool -s eth3 speed 1000
Cannot advertise speed 1000
Settings for eth3:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: on (auto)
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
I'm running the command below, but access to the server is going and not coming. The document is old but how can I fix this problem.
ethtool -s eth3 speed 1000 duplex full autoneg off
Network card details
Intel Corporation I350 Gigabit